Compressor Oils
HYCOM SYN 150
Special Features:
- HYCOM SYN series are synthetic compressor oils made from High Performance PAO type base stocks which are further enhanced with state of the art additive systems which ensure improved oxidation performance and long term solubility. These oils can be used for high pressure & high performance screw compressor, rotary compressor where improved performance against oxidation and enhanced cleanliness is needed.
Physico-chemical Properties
| Kin. Viscosity @ 40ºC, cSt | 152 |
| Kin. Viscosity @ 100ºC, cSt | 20.6 |
| Viscosity Index | 158 |
| Pour Point, ºC | -39 |
| Acidity Inorganic., mg KOH/g | Nil |
| Flash Point, COC, ºC | 240 |
| Rusting Test | Passes |
| Foam Stability, ml, After 10 Min Settling Time Sequence I Sequence II Sequence III | 10/Nil 10/Nil 10/Nil |
| Oxidation Stability RPVOT | 2200 minutes |
| Ash Content, % Mass | <0.007 |
| Copper Strip, Corrosion, At 100°C For 3 Hours | 1A |
| Demulsibility A) % Water In Oil After 5 Hrs, B) Cuff After Centrifuging, Ml C) Total Free Water, Ml | 0.2 0.05 87 |
| Air Release Value @ 90°C | 4 |
| Additive Solubility | Passes |
| FZG (A/8.3/90) EP Test, PLS | 12 |
| 4 Ball Wear, 54°C, 1800 rpm, 20 Kgs, Hr, WSD, mm Max | 0.3 |
| Thermal Stability CM Procedure B Copper Appearance Steel Appearance Sludge % Visc Increase | 1 No Deposit /Discoloration None 0.02 |
